Highlights • Cryo-FIB specimen preparation for TEM imaging of resin–dentin interfaces is proposed. • We report step by step FIB sample preparations in details. • Minimizing the milling temperature improve…
Abstract Purpose This study evaluated failure behavior when resin-composite cylinders bonded to dentin fractured under traditional “shear” testing. Failure was assessed by scaling of failure loads to changes in cylinder…
Highlights • An in situ dental biofilm model was used to evaluate the novel glass ionomer cement (GIC) containing dimethylaminododecyl methacrylate (DMADDM). • DMADDM could increase surface charge density but…
Highlights • Hard machining reduced around 27% the leucite glass–ceramic strength. • Glaze firing is able to reduce the leucite glass–ceramic strength. • Glaze firing can change the ceramic microstructure…
Highlights • We examined residual monomer from six bulk fill composite resins. • Residual monomers were eluted from bulk fill composite resins at all time periods. • The amount of…
The authors regret that the reference numbers listed in Table 1 were incorrect. The online version has now been corrected and shows the correct citation information. Corrections have also been…
Highlights • Indirect tensile test is appropriate to assess the influence of artificial aging on resin composite cements. • Dual-cured specimens show less variance of strength values than self-cured specimens….
Highlights • The new adhesive containing 7.5% MPC + 5% DMAHDM had protein adsorption that was nearly 20-fold less than that of commercial SBMP control. • Adding MPC or DMAHDM…
Highlights • Cryo-FIB specimen preparation for TEM imaging of resin–dentin interfaces is proposed. • We report step by step FIB sample preparations in details. • Minimizing the milling temperature improve…
Abstract Purpose This study evaluated failure behavior when resin-composite cylinders bonded to dentin fractured under traditional “shear” testing. Failure was assessed by scaling of failure loads to changes in cylinder…
