Abstract Objectives In this study the amount of TEGDMA and HEMA eluted from several adhesive systems was quantified. Methods The adhesive systems were applied according to manufacturers’ instructions in an…
Abstract Objectives To produce a reduced stress dental restorative material while simultaneously maintaining excellent mechanical properties, we have incorporated an allyl sulfide functional group into norbornene–methacrylate comonomer resins. We hypothesize…
Abstract Objective To determine by nanoindentation the hardness and elastic modulus of resin-composites, including a series with systematically varied filler loading, plus other representative materials that fall into the categories…
Abstract Objectives To investigate the effect of photo-activation of riboflavin either by ultraviolet (UVA) or visible blue light (BL) on the biodegradation resistance, strength of demineralized dentin matrix, bond strength…
Abstract Objectives Collagen-based nanocomposite incorporating nanobioactive glass (Col/nBG) was developed as a scaffolding matrix for dentin–pulp regeneration. The effects of the novel matrix on the proliferation of human dental pulp…
Abstract Objective The purpose of the study was the evaluation of the bond strength of a provisional resin to a polyetheretherketon (PEEK) using different surface treatments and conditioning methods. Methods…
Abstract Objective The aim of the present study was to investigate two- and three-body wear of microfilled, micro-hybrid and nano-hybrid composite resins using a ball-on-disc sliding device. Methods One microfilled…
Abstract Surface modification of biomaterials has been shown to improve the biological response to dental implants. The ability to create a controlled micro-texture on the implant via additive surface modification…
Abstract Objectives To measure shrinkage strain, exotherm, and coefficient of thermal expansion (CTE), simultaneously for a set of representative resin-composites. Methods Six commercially available resin-composites with different filler loadings were…
Abstract Objective To determine the effectiveness and efficiency of non-thermal, atmospheric plasmas for inducing polymerization of model dental self-etch adhesives. Methods The monomer mixtures used were bis-[2-(methacryloyloxy)ethyl] phosphate (2MP) and…
