Abstract Objective The purpose of this study was to investigate and compare the load distribution and displacement of cantilever prostheses with and without glass abutment by three dimensional finite element…
Highlights • Bioactive glass air-abrasion was used to pre-condition enamel white spot lesion. • Pre-conditioning increased the average surface roughness of the lesion. • An ultra-thin, clinically insignificant layer was…
Highlights • Accurate real-time, in vivo pulp temperature rise was measured in intact human first premolars. • Exposure to LED light at different exposure modes resulted in pulp temperature rise….
Abstract Objectives Unpolymerized (co)monomers and additives can be released from resin based composites (RBCs) and can enter the human organism. In this study, the binding of ingredients from composites to…
Abstract Objectives This is the first meta-analysis on the efficacy of composite resin restorations in anterior teeth. The objective of the present meta-analysis was to verify whether specific material classes,…
Abstract Objectives Bleaching treatments can affect on the polymer network of dental composites. This study was performed to evaluate the influence of different bleaching treatments on the elution of composite…
Abstract Introduction Titanium (Ti) and its alloys are used for implants and other dental materials. In this study, cytotoxicity, DNA damage, cellular uptake and size of three kinds of Ti…
Highlights • Replacing barium glass by DCPD did not affect composite degree of conversion. • Replacing barium glass by DCPD reduced 24-h strength, but not elastic modulus. • At 28…
Highlights • Influence of temperature on volumetric shrinkage and contraction stress was tested. • Four commercially available dental composites were tested. • Tests were carried out at 23, 30, 37,…
Abstract Objectives The aim of this study was to assess the resin matrix monomer composition of selected bulk-fill and conventional resin-composite materials using reverse phase liquid chromatography coupled with electron…
