Abstract Objectives The purpose of this study was to evaluate the cantilever-bending test as a bond-strength measurement method for enamel/composite adhesion. Materials and methods The buccal surface of bovine incisors…
Abstract Objective To evaluate the effect of the specimen design on the flexural strength ( σ f ) and failure mode of ceramic structures, testing the hypothesis that the ceramic…
Abstract Objectives Surface conditions are of interest in all-ceramic restorations since they can control both bonding and strength. Tensile testing methods are commonly used to evaluate surface conditions of ceramics….
Abstract Objectives The aim of the present study was to compare, in situ , the initial dental plaque formation on a recently developed silorane-based composite resin, Filtek Silorane, and on…
Abstract Objective To improve its mechanical performance, structural optimization had been used in a previous study to obtain an alternative design for a 3-unit inlay-retained fiber-reinforced composite (FRC) dental bridge….
Abstract Objectives The purpose of this study was to characterize the surface morphology and the elastic properties of four dental restorative flowable composites currently on the market (Venus Diamond Flow,…
Abstract Objective This study evaluated the effect of different chemical surface treatments on the surface characteristics of commercially pure titanium (cp Ti) and the adhesion of the porcelain–titanium system by…
Abstract Objectives To compare the crystalline phases present, quantify the adhesion to zirconia and measure the mechanical properties of four commercially available pressed ceramics suitable for zirconia substructures. Materials and…
Abstract The variability in methods and outcomes of bond strength testing reports is well documented in the dental literature. Many studies lack important information, which impairs the ability to reproduce…
Abstract Objective Review correlations of in vivo clinical performance with in vitro laboratory tests of restorative dental materials involving polymer-based matrices. Identify those factors interfering with the process. Materials and…
Abstract “Nothing worthwhile is ever without complications.” Nora Roberts The recent increase in reports from clinical studies of ceramic chipping has raised the question of which criteria should constitute success…
Abstract Resin–dentin bond strength durability testing has been extensively used to evaluate the effectiveness of adhesive systems and the applicability of new strategies to improve that property. Clinical effectiveness is…
Abstract Resin composites have become the first choice for direct posterior restorations and are increasingly popular among clinicians and patients. Meanwhile, a number of clinical reports in the literature have…
Abstract Objectives Methods used to measure and predict clinical biological responses to dental materials remain controversial, confusing, and to some extent, unsuccessful. The current paper reviews significant issues surrounding how…
Abstract Objectives This paper attempts to provide critical perspectives on common in vitro research methodologies, including shear bond testing, wear testing, and load-to-failure tests. Origins of interest in high-quality laboratory…
Abstract Objectives This overview is intended to highlight connections between monomer structure and the development of highly crosslinked photopolymer networks including the conversion dependent properties of shrinkage, modulus and stress….
Abstract Objectives Major changes are taking place in dental laboratories as a result of new digital technologies. Our aim is to provide an overview of these changes. In this article…
The warm and beautiful Costa do Sauipe, in the north of Brazil, set up a great scenario to celebrate the 70th anniversary of the Academy of Dental Materials . The…
Abstract Objectives We aimed to achieve detailed biomaterials characterization of a drug delivery system for local periodontitis treatment based on electrospun metronidazole-loaded resorbable polylactide (PLA) fibers. Methods PLA fibers loaded…
Abstract Objectives This study characterized the feldspathic ceramic surfaces after various silanization protocols. Methods Ceramic bars (2 mm × 4 mm × 10 mm) ( N = 18) of feldpathic…
