Abstract Objective Comparison of physical and mechanical properties of one conventional and a new NiTi wire, which had received an additional thermomechanical treatment. Methods Specimens of both conventional (NiTi) and…
Abstract Objective The objective was to compare equivalent stresses in molars restored with endocrowns as well as posts and cores during masticatory simulation using finite element analysis. Methods Four three-dimensional…
Abstract Objectives Uncontrolled formation of an oxide layer on base metal alloy surface impairs adhesion between the alloy and veneer ceramic. The aim of this study was to investigate the…
Abstract Objective The aim of this study was to evaluate the calcium release, pH, flow, solubility, water absorption, setting and working time of three experimental root canal sealers based on…
Abstract Objective This study evaluated the effect of different ferrule heights and varying degrees of substance loss on the fracture resistance of endodontically treated premolars. Methods Eighty extracted and endodontically…
Abstract Objectives Short ramie fibers were selected to investigate the effect of fiber length and volume fraction on the flexural properties of ramie fiber reinforced denture base PMMA. With the…
Abstract Objectives To compare three instruments for their ability to quantify enamel loss after acid erosion. Methods 6 randomized parallel groups of bovine enamel samples were subjected to citric acid…
Abstract Objective Amorphous bioglass 45S5 has been used for many years as bone substitute material. Bioactive glasses are also suitable as coating materials for implants in order to improve the…
Abstract Objectives In the present study, lithium-disilicate ceramic inlays should be analyzed biomechanically according to their thickness and dimension, and it should be clarified as to whether there is a…
Abstract Objectives The purpose of this study was to validate a new method to investigate the polymerization shrinkage vectors of composite during light curing and to evaluate the overall utility…
Abstract Objective This study evaluated the effect of adding diphenyliodonium hexafluorphosphate (DPI) as a third component of the free-radical photoinitiator system of model resin cements on their photopolymerization kinetics/stress and…
Abstract Objectives The aim of this study was to examine the effects of 45S5 bioactive glass (BAG) on the acid neutralizing, mechanical and physical properties of pit and fissure sealants….
Abstract Objectives The protective effects of N-acetyl cysteine (NAC) against cytotoxicity induced by conventional dental resin monomers have been widely documented. However, its effectiveness to detoxify cationic antibacterial monomers has…
Abstract Objectives Large tooth substance losses are frequent in posterior teeth because of primary caries or aging restorations. Inlays and onlays are often the minimal invasive solution in such cases,…
Abstract Objective Test the hypothesis that monolithic ceramics can be developed with combined esthetics and superior fracture resistance to circumvent processing and performance drawbacks of traditional all-ceramic crowns and fixed-dental-prostheses…
