Abstract Objective To investigate the effect of three different primers on shear and peel bond strengths between three maxillofacial silicone elastomers and an acrylic resin after 360 h of accelerated…
Abstract Dentin bonding performed with hydrophobic resins using ethanol-wet bonding should be less susceptible to degradation but this hypothesis has never been validated. Objectives This in vitro study evaluated stability…
Abstract Objectives The purpose of this study was to evaluate the relationship between changes in the modulus of elasticity and ultimate tensile strength of one-step self-etch adhesives, and their degree…
Abstract Objective To compare resin–dentin bond strengths and the micropermeability of hydrophobic vs. hydrophilic resins bonded to acid-etched or EDTA-treated dentin, using the ethanol wet-bonding technique. Methods Flat dentin surfaces…
Abstract Purpose To evaluate important material properties of six experimental resin-based restorative materials (EXP) with systematically modified resin matrices using conventional and alternative monomers in comparison with an experimental standard…
Abstract Objective Various chemical interactions can be used to develop ceramic–resin bonding and specific approaches are available for zirconia ceramics. This study evaluated the effect of a new experimental primer,…
Abstract Objectives To distinguish the physical properties of a new silorane-based restorative material in comparison to five methacrylate-based restorative materials – a compomer, giomer, nanocomposite, hybrid and micro-hybrid. Methods The…
Abstract Objectives Since stylus profilometry applies a force on the sample surface, it is logical to hypothesize that the profilometer penetrates the surface of the enamel softened by acid solutions….
Abstract Objectives This study evaluated the role of endogenous dentin MMPs in auto-degradation of collagen fibrils within adhesive-bonded interfaces. The null hypotheses tested were that adhesive blends or chlorhexidine digluconate…
Abstract Objectives (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load…
Abstract Objectives The aim of the study was to characterize the chemical composition, microstructure and roughness of two commercially available zirconia dental implants (WhiteSky and Zit-Z). Methods The chemical composition…
Abstract Objectives The aim of this study was to compare the curing reaction of five experimental adhesive blends containing different photo-initiating systems. The hypothesis tested was that degree of conversion…
Abstract Objective There is a great demand for dental implant surfaces to accelerate the process of peri-implant bone generation to reduce its healing time and enable early loading. To this…
