Abstract Objectives Evaluate the flexural strength ( σ ) and subcritical crack growth (SCG) under cyclic loading of glass-infiltrated alumina-based (IA, In-Ceram Alumina) and zirconia-reinforced (IZ, In-Ceram Zirconia) ceramics, testing…
Abstract Objectives The aim of the present work was to perform the first in vitro evaluation of a new interfacial bond-promoting material-and-method concept for on-demand long term bacteria inhibition in…
Abstract Objectives Evaluate the flexural strength ( σ ) and subcritical crack growth (SCG) under cyclic loading of glass-infiltrated alumina-based (IA, In-Ceram Alumina) and zirconia-reinforced (IZ, In-Ceram Zirconia) ceramics, testing…
Abstract Objectives This study evaluates the hypothesis that the incorporation of fibrous hydroxyapatite nanoparticles with high crystallinity and high aspect ratio, synthesized by hydrothermal method, into an experimental ethanol-based one-bottle…
Abstract Objectives The aim of this study was to measure the initial dynamic viscoelastic modulus change of dental composites during light curing using a custom made oscillation rheometer. Methods Six…
Abstract Objectives It has been the focus to develop low shrinkage dental composite resins in recent ten years. A major difficulty in developing low shrinkage dental materials is that their…
Abstract Objectives To reduce the effect of stresses due to volumetric shrinkage the authors propose an incremental technique for placing composite restorations. Methods The goal of the method is to…
Abstract Objectives The aim of this study was to develop a method for measuring the slumping tendency of flowable resin composites and to correlate the results with those obtained from…
Abstract Objective Measuring the structure, composition or suitability for bonding of the acid-etched dentin substrate, especially in its hydrated state, has been a formidable problem. The purpose of this study…
Abstract Objectives To evaluate and compare bond strengths of different primers and resin cements to silica-based and zirconia ceramics. Methods Silica-based and zirconia ceramic specimens were ground flat with #600-grit…
