Abstract Objective Despite the increased use of monolithic crowns, their performance has yet to be determined when the minimal tooth preparation (MTP) principle is considered. The goal of this study…
Graphical abstract Highlights • High probability of survival was observed even for 0.5 mm restorations. • Models with thinner restorations accumulated more stress in the structures. • Resin-matrix ceramic materials…
Graphical abstract Highlights • Digital technology in prosthetic practice uses milled PMMA discs. • DMA and Brillouin spectroscopy are innovative techniques in dentistry. • Tested materials exhibit better mechanical properties…
Highlights • Anisotropic corrosion resistance was found in SLM-processed Co-Cr alloys. • Selective corrosion occurred along the molten pool boundaries (MPBs). • The MPB area was dependent on the building…
Abstract Objectives The aim of this study was to investigate dentin bonding durability of different etch-and-rinse (ER) adhesive systems under fatigue stress and to compare morphological features of resin/dentin interfaces…
Abstract Objective Micro-nano scale surface modification of Ti-6Al-4V was investigated through the fascinated modern fiber engraving laser method. The process was performed at a high laser speed of 2000 mm/s,…
Abstract Objective The angiogenic differentiation of dental pulp stem cells (DPSCs) is important for tissue homeostasis and wound healing. In this study the influence of 2-hydroxyethyl methacrylate (HEMA) on angiogenic…
Abstract Objective The aim is to recommend a fast and cost-effective screening procedure for UK/SA SARS-CoV-2 variants in a routing diagnostic setting. Methods A rapid procedure using qPCR is described…
Highlights • Resin-matrix ceramics systems demonstrated high reliability at functional loads. • Resin-matrix ceramic fracture, chipping or catastrophic, is the chief failure mode. • Cracks originated by quasiplastic deformation under…
Abstract Objective The airborne-particle abrasion of zirconia with alumina particle (APA) has been reported to result in the durable bonding of appropriate adhesive luting systems. However, whether a delay between…
Highlights • Silanization of halloysite nanotubes was not detrimental to the mechanical properties of the resin-based material. • Silanization of halloysite nanotubes improved the antimicrobial activity of the chlorhexidine. •…
Graphical abstract Abstract Objective Viruses on environmental surfaces, in saliva and other body fluids represent risk of contamination for general population and healthcare professionals. The development of vaccines and medicines…
Highlights • Reduced functional loads affect interradicular (IR) bone. • Biomechanics in situ with X-ray and DVC can identify differences in functional adaptation of the DAJ. • Form- and material-related…
Highlights • Essential work of fracture (EWF) was used to determine the essential work of fracture of a fiber-reinforced dental composite. • The thickness of conventional composites covering the fiber-reinforced…
Abstract Objectives The aim of this study was to identify the relative strengths and weaknesses of different interfaces within the multilayer structure of a zirconia crown restoration when applying different…
Graphical abstract Highlights • In vivo aging kinetics was assessed for biomedical grade 3Y-TZP ceramics. • 2-year exposure showed ∼3-times faster aging kinetics compared to in vitro extrapolation. • Airborne-particle…
Highlights • Conventional, milled, and additive manufactured polymers showed comparable wear • Enamel antagonist wear was not influenced by the investigated materials • Additive manufactured polymers showed decreased mechanical properties…
Highlights • Highly-translucent 3Y-TZP is more susceptible to in vivo ageing than classic 3Y-TZP. • Rapid sintering increases the susceptibility to in vivo ageing. • Airborne-particle abrasion suppresses in vivo…
Highlights • Preparation design and veneer thickness influence the bond of ceramic veneers. • Leucite reinforced ceramic veneers should have a thickness of at least 0.5 mm. • If possible,…
Graphical abstract Highlights • Relationship between self-healing capacity and initiator concentration. • Relationship between self-healing capacity and microcapsule size and concentration. • Implementation of microcapsule-based self-healing in commercial dental composites….
