Abstract Objectives Stickiness is a vital rheological parameter for the clinical handling behavior of unset resin composite restoratives. The aim of this study was to investigate the stickiness of three…
Abstract Objectives Components released from resin-based dental materials are important factors in the assessment of the biocompatibility of these materials. The study was performed to investigate the elution of substances…
Abstract Objective The purpose of this study was to determine the crack resistance behavior ( K R ) of human enamel in relation to its microstructure. Methods Human molar teeth…
Abstract Objectives The purpose of this in vitro study was to compare the centric and eccentric quasi-static and fatigue fracture strength of industrially prefabricated resin-bonded three-unit inlay-retained fixed dental prostheses…
Abstract Objective To evaluate the biaxial and short-beam uniaxial strength tests applied to resin composites based upon their Weibull parameters, fractographic features and stress distribution. Methods Disk- (15 mm ×…
Abstract Objectives The surfaces of maxillo-facial prostheses made of silicone elastomers exposed to soft tissues may interact with saliva and nasal secretion. These body fluids may lead to colonisation of…
Abstract Objectives Aim of this study was by continuous monitoring to assay the proliferative capacity of human gingival fibroblasts (HGFs), to investigate cytotoxicity of the most common monomers/comonomers in dental…
Abstract Objectives Air-abrasion as bonding conditioning method for zirconia ceramic might compromise the mechanical strength of zirconia restorations. The purpose of this study was to evaluate the influence of surface…
Abstract Objective The aim was to characterize the variations in the structure and surface dehydration of acid demineralized intertubular dentin collagen network with the variations in dentin depth and time…
Abstract Objectives The objective of this work was to evaluate thiol-norbornene and thiol-ene–methacrylate systems as the resin phase of dental restorative materials and demonstrate their superior performance as compared to…
Abstract Ammonium hexafluorosilicate [SiF: (NH 4 ) 2 SiF 6 ] was prepared in order to overcome the tooth discoloration caused by diamine silver fluoride [AgF: (NH 3 ) 2…
Abstract Objectives To investigate the chipping resistance of veneered zirconia specimens and compare it to the chipping resistance of porcelain fused to metal (PFM) specimens. Methods Veneered zirconia and PFM…
Abstract Objectives This paper collates some of the existing data on the clinical evaluations of resin-modified glass-ionomer cements (RMGICs) since their introduction two decades ago. Methods The relevant literature was…
Abstract Dental caries is the most prevalent non-communicable disease in the world. Its management in high-income countries over the last four decades has resulted in relatively low caries prevalence in…
Abstract Objectives The small volume of human dentin available for sample preparation and the local variations in its microstructure present a real challenge in the determination of their mechanical properties….
Abstract Objectives To review the history, theory and current applications of Weibull analyses sufficient to make informed decisions regarding practical use of the analysis in dental material strength testing. Data…
Abstract Objectives Maxillofacial silicone elastomers are used to replace facial parts lost through disease or trauma. However, these materials do not possess ideal properties. The purpose of this study was…
Abstract Objective To evaluate the effects of clinically relevant variables on the maximum principal stress (MPS) in the veneer layer of an anatomically correct veneer–core–cement–tooth model. Methods The average dimensions…
Abstract Objective The aim of this investigation was to determine the effect of an experimental liquid rubber (LR) toughening agent on fracture toughness, crosslink density and Barcol hardness of polymerized…
Abstract Objective One of the limitations of resin cements and flowable dental composites is their poor mechanical properties such as low flexural strength and fracture resistance under body conditions. The…
