Abstract Objectives To evaluate the influence of different air-blowing durations on the micro-tensile bond strength (μTBS) of five current one-step adhesive systems to dentin. Methods One hundred and five caries-free…
Abstract Objective The objective of this project, which was initiated from the Academy of Dental Materials, was to review and critically appraise methods to determine fracture, deformation and wear resistance…
Fiber-reinforced composite (FRC) materials were introduced to dentistry more than five decades ago . Following extensive research and product development, it took more than twenty-five years until FRCs were first…
Abstract Objectve We aimed to investigate the cytotoxicity and antibacterial properties of nano-silver-coated polyetheretherketone (PEEK) produced through magnetron sputtering and provide a theoretical basis for its use in clinical applications….
Abstract Objective To assess the cuspal deflection of standardised large mesio-occluso-distal (MOD) cavities in third molar teeth restored using conventional resin-based composite (RBC) or their bulk fill restorative counterparts compared…
Highlights • Poly-acrylic acid coated copper iodide (PAA-CuI) adhesives delayed degradation of resin- adhesive bonds. • Incorporation of PAA-CuI particles did not affect the tensile strength of any of the…
Highlights • Three fillers with various functionality tailored an adhesive bioactive. • Viscosity increased due to the bioactive glass agglomerates. • Maintained or improved structural and physico-chemical properties of the…
Abstract Objectives This study aimed to compare and contrast two resin–ceramic bond strength tests, the tensile bond strength and the four-point bending tests. The effects of hydrofluoric acid (HF) etching…
Abstract Objectives Relating to low-dose Bisphenol-A (BPA), there is still a lack of mechanistic studies in oral cells, representing the first targets of BPA by oral intake. The objective of…
Abstract Objective Secondary caries is a primary reason for dental restoration failures. The objective of this study was to investigate the remineralization of human dentin lesions in vitro via restorations…
Highlights • Monolithic zirconia crowns withstand high loading forces. • Severity of crown margin defects is correlated with decreasing of load at fracture. • Production method affects the quality of…
Abstract Objectives To quantify the adhesion of two bonding approaches of zirconia to more aesthetic glass-ceramic materials using the Schwickerath (ISO 9693-2:2016) three point bend (3PB) [1] test to determine…
Highlights • Laser-sintering of thin glass-ceramic films on enamel was successfully achieved. • Bonding between enamel and the glass-ceramic coating was proved. • Method holds great potential to protect susceptible…
Abstract Objective The aim of the study was to evaluate the impact of low-pressure argon/oxygen plasma with and without previous sandblasting on the shear bond strength (SBS) between dental PEEK…
Abstract Objectives To assess the impact of irradiation on Martens hardness parameters of different PEEK qualities filled with titanium dioxide (TiO 2 ), namely PEEK/0%, PEEK/20%, and PEEK/>30%. Methods For…
Graphical abstract Highlights • C(T) shows be a reliable indicator of the zirconia/cement bond quality. • R a , R sk and area variation were evaluated by AFM. • Weibull…
In 2014 the Board of the Academy of Dental Materials recognized there was an increasing need to provide written mentorship to young faculty and graduate students doing materials research –…
Graphical abstract Highlights • PMMA incorporating silver-loaded mesoporous silica nanoparticles (Ag-MSNs) led to increased mechanical properties. • PMMA incorporating Ag-MSNs exhibited an anti-adhesive effect against infectious strains without cytotoxicity. •…
Abstract Objectives The purpose of this study was to investigate temperature rise in the composite and dentin of a class I cavity in extracted human molars under different restoration conditions,…
Highlights • Long-term bond strength was not influenced by TiF 4 in aqueous or primer solution and concentrations. • Bond strength values to superficial bond were higher than values to…
