Abstract Objective The present work evaluated the thermal behavior of porcelain–metal and porcelain–zirconia restorations during fast and slow firing and cooling. Methods All-ceramic (porcelain on zirconia) and porcelain-fused-to-metal (PFM) molar…
Abstract Objective The aim of this study was to investigate the effect of aluminosilicate clay nanotubes (Halloysite, HNT) incorporated into the adhesive resin of a commercially available three-step etch and…
Abstract Recent reports on bilayer ceramic crown prostheses suggest that fractures of the veneering ceramic represent the most common reason for prosthesis failure. Objective The aims of this study were…
Abstract Objectives Bioactive glass (BAG) is known to possess antimicrobial properties and release ions needed for remineralization of tooth tissue, and therefore may be a strategic additive for dental restorative…
Abstract Objectives Fine-grained, high strength, translucent leucite dental glass-ceramics are synthesized via controlled crystallization of finely milled glass powders. The objectives of this study were to utilize high speed planetary…
Abstract Objectives To determine the effects of surface finish and mechanical loading on the rising toughness curve (R-curve) behavior of a fluorapatite glass-ceramic (IPS e.max ZirPress) and to determine a…
Abstract Objective The aim of this study was to evaluate the clinical effectiveness of a one-step HEMA-free self-etching adhesive (SEA) placed with a micro-fine hybrid resin composite in Class II…
Abstract Objectives The aim of this paper is to develop a comprehensive mathematical model for shrinkage stress development in dental composites that can account for the combined effect of material…
Abstract Objective Clinical studies reveal that veneer chipping is one major problem associated with zirconia based dental restorations, the underlying mechanisms being still investigated. We semi-quantitatively analyzed the effects of…
Abstract Objectives The aim of this study was to evaluate the linear and volumetric dimensional changes of six denture base resins processed by their corresponding injection-molding systems at 3 time…
Abstract Objective Comparison of physical and mechanical properties of one conventional and a new NiTi wire, which had received an additional thermomechanical treatment. Methods Specimens of both conventional (NiTi) and…
Abstract Objectives Uncontrolled formation of an oxide layer on base metal alloy surface impairs adhesion between the alloy and veneer ceramic. The aim of this study was to investigate the…
Abstract Objective The objective was to compare equivalent stresses in molars restored with endocrowns as well as posts and cores during masticatory simulation using finite element analysis. Methods Four three-dimensional…
Abstract Objective The aim of this study was to evaluate the calcium release, pH, flow, solubility, water absorption, setting and working time of three experimental root canal sealers based on…
Abstract Objective This study evaluated the effect of different ferrule heights and varying degrees of substance loss on the fracture resistance of endodontically treated premolars. Methods Eighty extracted and endodontically…
Abstract Objectives Short ramie fibers were selected to investigate the effect of fiber length and volume fraction on the flexural properties of ramie fiber reinforced denture base PMMA. With the…
Abstract Objectives To compare three instruments for their ability to quantify enamel loss after acid erosion. Methods 6 randomized parallel groups of bovine enamel samples were subjected to citric acid…
Abstract Objective Amorphous bioglass 45S5 has been used for many years as bone substitute material. Bioactive glasses are also suitable as coating materials for implants in order to improve the…
Abstract Objectives In the present study, lithium-disilicate ceramic inlays should be analyzed biomechanically according to their thickness and dimension, and it should be clarified as to whether there is a…
Abstract Objectives The purpose of this study was to validate a new method to investigate the polymerization shrinkage vectors of composite during light curing and to evaluate the overall utility…
