Three-dimensional evaluation of dentofacial transverse widths of adults with various vertical facial patterns

Introduction

The purpose of this study was to investigate maxillomandibular transverse widths and molar inclinations of adults with hypodivergent, normodivergent, and hyperdivergent facial patterns using cone-beam computed tomography.

Methods

We evaluated Class I subjects (55 men, 66 women) who were divided into hypodivergent (<27°), normodivergent (28°-37°), and hyperdivergent (>38°) groups by their mandibular plane angles. Frontal and coronal views of the images were analyzed. Sex differences, vertical facial pattern differences, and related factors were assessed with independent 2-sample t tests, 1-way analysis of variance followed by post hoc Tukey tests, and Pearson correlation analysis.

Results

The hypodivergent group had greater maxillary alveolar widths 7 mm apically from the alveolar crest. The intermolar widths and molar inclinations showed no significant differences among the groups. As the mandibular plane angles increased, interjugular widths, transverse mandibular widths, and buccolingual maxillary alveolar widths at the midroot level decreased, whereas the maxillomandibular width differences and palatal heights increased im both sexes.

Conclusions

An increase in the mandibular plane angle is associated with tendencies of narrow mandibular arches, thinner maxillary alveolar bones at the midroot level, and higher palatal arches in both sexes. Intermolar widths and molar inclinations were not significantly affected by vertical facial patterns.

Highlights

  • Maxillomandibular transverse width and molar inclinations were assessed in adults.

  • Subjects were grouped by hypodivergent, normodivergent, and hyperdivergent facial pattern.

  • Intermolar widths and molar inclinations were not significantly affected by facial pattern.

  • Increased mandibular plane angle was associated with narrow mandibular arches.

  • It was also associated with thinner maxillary alveolar bones midroot and high palatal arches.

A balance between maxillary and mandibular transverse dimensions in the dental arches is considered one of the most important features for maintaining a functional and stable occlusion. When this balance is disrupted, a transverse discrepancy in the dentofacial region generally occurs, with single or multiple posterior teeth in a crossbite state with an abnormal buccolingual relationship in 1 jaw or both jaws when in occlusion. The prevalence of posterior crossbite shows wide variations among studies with rates between 8% and 22%. The etiology of this malocclusion is often multifactorial including factors such as arch deficiencies, prolonged or early loss of deciduous teeth, deleterious oral habits such as thumb sucking, cleft palate, and so on. In the long term, a transverse discrepancy that may adversely affect dentofacial esthetics.

Dental arch parameters have been related to vertical facial types in many studies. The mandibular plane has been used as a standard to divide the subjects into hypodivergent, normodivergent, and hyperdivergent growth patterns. Subjects with hypodivergent growth patterns have short lower anterior facial height, small mandibular plane angle, and a tendency of deepbite. Subjects with hyperdivergent growth patterns often have increased lower anterior facial height, high mandibular plane angle, short ramus, and clockwise mandibular rotation. Some authors have suggested that in subjects with increased vertical dimensions, the maxillary dental arch is narrower, the palates have higher arches, and the posterior teeth are buccally inclined, whereas those with decreased vertical dimensions have the opposite characteristics such as lingually inclined molars. However, Ross et al found no differences in molar inclinations and facial types. Furthermore, Tsunori et al argued that, although subjects with hyperdivergent growth patterns have narrow arches, strong pressure of the tongue against the teeth allowed uprighting of the molars. These aforementioned studies using 2-dimensional radiographs or study casts reflect the diversity of opinions on transverse dimensions and the relationship to various facial types in the vertical dimensions.

If the transverse width of the dental arch and the molar inclinations have correlations to vertical facial types, patients would benefit from treatment plans that include differentiated approaches for facial patterns to improve the transverse discrepancy to achieve an ideal functional and esthetic occlusion. Thus, the aim of this study was to investigate whether subjects with different vertical facial patterns vary in maxillomandibular transverse widths and first molar angulations using 3-dimensional cone-beam computed tomography (CBCT) images.

Material and methods

In this retrospective study, we evaluated subjects who visited Gangnam Severance Dental Hospital from January 2011 to February 2017 with CBCT scans (Pax-Zenith 3D; Vatech, Gyeonggi-Do, Korea) taken for diagnostic purposes of impacted third molars. The subjects were asked to relax the tongue and lip positions and maintain an intercuspal occlusion while the images were taken with a scan time of 24 seconds, tube voltage of 105 kV(p), and 0.3-mm voxel size. Pretreatment cephalograms were generated from the CBCT scans to classify the subjects based on their maxillomandibular sagittal discrepancies. The final sample included 121 adults (55 men, 66 women) with Class I molar relationships and ANB angles between 0° and 4°, classified as skeletal Class I subjects according to the classification of Steiner. Subjects were excluded if there was facial asymmetry greater than 2 mm measured by a menton deviation from the midsagittal plane, dental crowding greater than 5 mm, posterior crossbite, prosthetic treatment of the first molars, missing or extracted permanent teeth excluding prior extractions of third molars, previous orthodontic treatment, and a significant medical or dental history such as cleft lip or palate, craniofacial syndrome, or trauma. This study was approved by the research review board of Gangnam Severance Hospital (3-2017-0034) in Seoul, Korea.

The sample was divided into 3 groups of skeletal divergence by the sella-nasion line angle to the mandibular plane (SN-MP angle) measured from the generated cephalograms: less than 27° (hypodivergent), between 28° and 37° (normodivergent), and greater than 38° (hyperdivergent). These SN-MP values represented about 1 SD from the mean SN-MP angle of adults reported by Riedel and were based on previous studies. The mean SN-MP angle and demographics for the 3 groups are shown in Table I .

Table I
Demographic data of the subjects
Hypodivergent Normodivergent Hyperdivergent
Male Female Male Female Male Female
n 15 15 19 24 21 27
Age (y) 23.03 ± 5.64 23.71 ± 7.71 23.41 ± 3.55 26.75 ± 8.27 26.18 ± 7.99 22.62 ± 5.87
ANB (°) 2.03 ± 1.04 1.99 ± 1.15 2.25 ± 0.93 2.83 ± 0.6 2.10 ± 1.14 3.10 ± 0.76
SN-MP (°) 24.1 ± 2.60 25.15 ± 1.94 35.40 ± 1.74 33.79 ± 1.73 42.33 ± 3.11 41.15 ± 2.38

ANB , Angle formed by A-point–nasion–B-point; SN-MP , angle between the sella-nasion line and mandibular plane.

Skeletal and dental evaluations were performed on the coronal cross-sections of the CBCT scans by the OnDemand3D imaging software (CyberMed, Seoul, Korea). Cross-sections of 5-mm thickness were used to visualize both the mesiobuccal and palatal roots of the maxillary first molars on the same section. This was because a thinner section might show a portion of the maxillary root and mislead the investigator as to the location of the furcation. The following reference planes were used to ensure consistent orientation of the 2-dimensional coronal slices: (1) the axial plane was defined as the Frankfort horizontal, the plane passing through the bilateral orbitales and the right porion; (2) the coronal plane, perpendicular to the axial plane, passing the buccal groove of the maxillary right first molar; and (3) the sagittal plane, perpendicular to the axial and coronal planes passing the midpoint of the medial rims of the orbits.

From the frontal view of the CBCT scan, the transverse distance between the bilateral jugular process and the bilateral antegonial notches were measured. The following measurements were made in the coronal plane. The transverse measurements were obtained by measuring the transverse width using the following bilateral landmarks on the maxilla and the mandible: (1) buccal alveolar crest point, (2) apical point 7 mm from the buccal alveolar crest, (3) lingual alveolar crest point, (4) apical point 7 mm from the lingual alveolar crest, and (5) most convex point on the buccal side of the first molar. The apical point 7 mm from the alveolar crest landmark was used to represent the midpoint of the first molar root length because the average maxillary and mandibular first molar root lengths have been reported to be 13 and 14 mm, respectively. The angulations of the maxillary first molars were obtained by measuring the angles formed by the long axes of the molars and the Frankfort horizontal plane. The angulations of the mandibular first molars were obtained by measuring the angles formed by the long axes of the molars and the line connecting the mandibular inferior borders. Palatal depth was assessed by measuring the distance between the functional occlusal plane and the most superior point on the palate.

For further evaluations, the following width differences were calculated: (1) maxillomandibular width difference, (2) maxillary buccolingual alveolar width at the alveolar crest and 7 mm apically from the alveolar crest, and (3) mandibular buccolingual alveolar width at the alveolar crest and 7 mm apically from the alveolar crest. All landmarks and measurements used in this study are shown in Figures 1 and 2 .

Fig 1
Transverse measurements in the frontal view and location of the coronal plane in the midsagittal plane view: J-J , tranverse width at the bilateral interjugular point; AG-AG , transverse width at the bilateral antegonial notch point. MxMn difference is the difference between the AG-AG and J-J widths.

Fig 2
Transverse and angular measurements in the coronal plane: A-B , maxillary transverse width at the alveolar crest; C-D , maxillary transverse width 7 mm apically from the alveolar crest; E-F, mandibular transverse width at the alveolar crest; G-H , mandibular transverse width 7 mm apically from the alveolar crest; M1-M2 , maxillary intermolar width; M3-M4 , mandibular intermolar width; I , maxillary right first molar inclination; J , maxillary left first molar inclination; K , mandibular right first molar inclination; L , mandibular left first molar inclination; palatal height , distance from the functional occlusal plane to the most superior point on the palate. Buccolingual width at the maxillary alveolar crest, difference between A-B and A′-B′ widths divided by 2; buccolingual width 7 mm from the maxillary alveolar crest, difference between C-D and C′-D′ widths divided by 2; buccolingual width at the mandibular alveolar crest, difference between E-F and E′-F′ widths divided by 2; buccolingual width 7 mm from the mandibular alveolar crest, difference between G-H and G′-H′ widths divided by 2.

Statistical analysis

All measurements were performed by 2 examiners (S.H., S.J.) who were calibrated for measuring the transverse parameters and had at least 2 years of clinical experience in orthodontic practice using CBCT images. Reproducibility in intraexaminer measurements was assessed by measuring 20 randomly selected samples twice 2 weeks later. The intraclass correlation coefficient showed high reliability ( r = 0.95). To assess interexaminer reliability, 20 subjects were randomly chosen and measured by another examiner (K.K.); this showed high correlations as well ( r = 0.90-0.96).

Based on a pilot study, a minimum sample size of 14 subjects per group was determined (G* Power 3, Dusseldorf, Germany) at α = 0.05, power of 80%, and effect size of 0.5 to detect differences in the transverse width at the 7-mm apical point from the alveolar crest in the 3 groups with analysis of variance. The normality of the variables was tested by the Kolmogorov-Smirnov test. Descriptive statistics were calculated for all variables as means and standard deviations. Sex differences were analyzed by independent 2-sample t tests. Differences between the hypodivergent, normodivergent, and hyperdivergent groups were compared by 1-way analysis of variance followed by post hoc Tukey honestly significant difference tests. Factors that were affected by an increase in the mandibular plane angle were further checked by Pearson correlation analysis. A P value of less than 0.05 was considered statistically significant. All statistical analyses were performed using the SPSS software program (version 20.0; IBM, Armonk, NY).

Results

Transverse widths measured at the interjugular, antegonial, maxillary alveolar crest, 7 mm apically from the maxillary alveolar crest, and maxillary intermolar width were significantly greater in the men in all 3 groups ( Table II ).

Table II
Sex difference of transverse measurements and molar inclinations according to vertical facial pattern
Variable Hypodivergent Normodivergent Hyperdivergent
Men Women P Men Women P Men Women P
Interjugular W (mm) 73.28 ± 3.85 68.55 ± 2.70 69.66 ± 2.50 65.43 ± 2.71 69.20 ± 2.28 64.36 ± 3.46
Antegonial W (mm) 89.24 ± 4.08 83.91 ± 4.05 90.22 ± 4.03 86.17 ± 2.73 89.51 ± 3.14 85.58 ± 2.66
MxMn difference (mm) 16.70 ± 3.24 15.84 ± 3.19 20.56 ± 3.17 20.74 ± 3.29 20.39 ± 3.20 21.22 ± 3.89
Mx alveolar crest W (mm) 61.21 ± 3.66 57.07 ± 2.32 59.93 ± 3.15 57.73 ± 2.42 60.13 ± 2.42 56.90 ± 3.08
Mx 7 mm W (mm) 68.38 ± 3.30 63.01 ± 3.06 66.56 ± 2.54 62.92 ± 3.27 65.30 ± 4.03 61.61 ± 3.75
Mn alveolar crest W (mm) 58.52 ± 2.46 55.38 ± 2.10 58.5 ± 5.07 56.55 ± 2.25 58.05 ± 4.33 56.10 ± 2.37
Mn 7 mm W (mm) 66.09 ± 3.5 64.37 ± 5.00 66.11 ± 4.07 62.98 ± 3.88 62.86 ± 5.03 60.90 ± 4.54
Mx intermolar W (mm) 57.70 ± 2.76 54.18 ± 2.42 57.27 ± 2.90 55.56 ± 2.41 57.01 ± 2.72 54.79 ± 2.20
Mn intermolar W (mm) 50.13 ± 2.46 48.32 ± 2.05 49.16 ± 2.59 48.23 ± 2.33 48.61 ± 2.30 48.65 ± 1.89
Mx Rt inclination (°) 94.09 ± 2.74 92.91 ± 3.29 93.75 ± 2.43 93.91 ± 3.58 94.97 ± 4.21 94.58 ± 2.96
Mx Lt inclination (°) 95.13 ± 2.49 95.38 ± 3.03 94.78 ± 2.62 94.48 ± 3.95 96.48 ± 3.92 95.74 ± 2.22
Mn Rt inclination (°) 78.29 ± 3.11 80.02 ± 1.95 78.99 ± 3.73 79.65 ± 2.17 78.65 ± 3.60 80.02 ± 2.60
Mn Lt inclination (°) 78.32 ± 2.49 78.23 ± 5.63 80.06 ± 2.98 79.29 ± 2.33 78.15 ± 4.70 79.60 ± 2.81
Palatal height (mm) 19.04 ± 2.33 16.98 ± 1.35 20.04 ± 2.15 19.35 ± 2.21 20.83 ± 2.11 20.03 ± 1.09
BL Mx alveolar crest W (mm) 11.36 ± 1.14 11.11 ± 0.81 11.05 ± 1.02 10.41 ± 0.66 11.14 ± 0.93 10.98 ± 1.31
BL Mx 7 mm W (mm) 18.54 ± 0.84 17.70 ± 3.63 16.88 ± 1.06 15.36 ± 1.30 16.16 ± 1.72 15.33 ± 1.52
BL Mn alveolar crest W (mm) 10.17 ± 0.79 10.34 ± 0.47 9.78 ± 2.12 9.50 ± 0.93 10.16 ± 1.47 9.75 ± 1.04
BL Mn 7 mm W (mm) 17.78 ± 1.66 17.3 ± 1.84 17.76 ± 2.50 16.04 ± 2.46 16.38 ± 2.23 15.85 ± 2.35
W , Width; Mx , maxillary; Mn , mandibular; MxMn difference , difference of antegonial and interjugular width; Rt , right side; Lt , left side; BL , buccolingual.
* P <0.05; P <0.01; P <0.001.

In the hypodivergent group, men showed greater widths at the mandibular alveolar crest and greater palatal heights. In the normodivergent group, men had greater widths 7 mm apically from the mandibular alveolar crest. The maxillary buccolingual alveolar crest width and buccolingual alveolar width 7 mm apically from the maxillary and mandibular alveolar crests were also greater for men in the normodivergent group. In the hyperdivergent group, the buccolingual alveolar width 7 mm apically from the mandibular alveolar crest was greater for men ( Table II ).

For the vertical facial pattern, differences between the hypodivergent, normodivergent, and hyperdivergent groups were compared. In both sexes, the hypodivergent group had the greatest interjugular width, the smallest maxillomandibular width difference, and the greatest buccolingual alveolar width 7 mm apically from the maxillary alveolar crest ( Tables III and IV ).

Table III
Difference of transverse and angular parameters according to vertical facial patterns in men (analysis of variance)
Variable Hypodivergent Normodivergent Hyperdivergent P value
Interjugular W (mm) 73.28 ± 3.85 a 69.66 ± 2.50 b 69.20 ± 2.28 b 0.0002
Antegonial W (mm) 89.24 ± 4.08 90.22 ± 4.03 89.51 ± 3.14 0.7258
MxMn difference (mm) 16.70 ± 3.24 a 20.56 ± 3.17 b 20.39 ± 3.20 b 0.0018
Mx alveolar crest W (mm) 61.21 ± 3.66 59.93 ± 3.15 60.13 ± 2.42 0.4409
Mx 7 mm W (mm) 68.38 ± 3.30 a 66.56 ± 2.54 ab 65.30 ± 4.03 b 0.0331
Mn alveolar crest W (mm) 58.52 ± 2.46 58.5 ± 5.07 58.05 ± 4.33 0.9271
Mn 7 mm W (mm) 66.09 ± 3.5 a 66.11 ± 4.07 ab 62.86 ± 5.03 b 0.0329
Mx intermolar W (mm) 57.70 ± 2.76 57.27 ± 2.90 57.01 ± 2.72 0.7675
Mn intermolar W (mm) 50.13 ± 2.46 49.16 ± 2.59 48.61 ± 2.30 0.2892
Mx Rt inclination (°) 94.09 ± 2.74 93.75 ± 2.43 94.97 ± 4.21 0.5036
Mx Lt inclination (°) 95.13 ± 2.49 94.78 ± 2.62 96.48 ± 3.92 0.2114
Mn Rt inclination (°) 78.29 ± 3.11 78.99 ± 3.73 78.65 ± 3.60 0.8498
Mn Lt inclination (°) 78.32 ± 2.49 80.06 ± 2.98 78.15 ± 4.70 0.239
Palatal height (mm) 19.04 ± 2.33 20.04 ± 2.15 20.83 ± 2.11 0.0617
BL Mx alveolar crest W (mm) 11.36 ± 1.14 11.05 ± 1.02 11.14 ± 0.93 0.6694
BL Mx 7 mm W (mm) 18.54 ± 0.84 a 16.88 ± 1.06 b 16.16 ± 1.72 b 0.0001
BL Mn alveolar crest W (mm) 10.17 ± 0.79 9.78 ± 2.12 10.16 ± 1.47 0.7033
BL Mn 7 mm W (mm) 17.78 ± 1.66 17.76 ± 2.50 16.38 ± 2.23 0.0841
Only gold members can continue reading. Log In or Register to continue

Stay updated, free dental videos. Join our Telegram channel

Dec 12, 2018 | Posted by in Orthodontics | Comments Off on Three-dimensional evaluation of dentofacial transverse widths of adults with various vertical facial patterns

VIDEdental - Online dental courses

Get VIDEdental app for watching clinical videos