Study of mandible bone mineral density of Chinese adults by dual-energy X-ray absorptiometry

Abstract

The objective of this study was to measure the bone mineral density (BMD) of mandible and study the correlation between the BMD of the mandible and the lumbar vertebrae. 224 healthy volunteers were recruited in China and divided into 6 age groups: 20–29, 30–39, 40–49, 50–59, 60–69, and over 70 years. Dual-energy X-ray absorptiometry (DXA) was used to measure the BMD of the lumbar vertebrae and the mandible of each volunteer. The BMD of mandibular chin, mandibular angle and the lumbar vertebrae (L1–L4) was 1.3013 ± 0.2576 g/cm 2 , 1.0484 ± 0.1087 g/cm 2 and 1.1195 ± 0.1373 g/cm 2 , respectively. The BMD of mandibular angle and lumbar vertebrae decreased significantly beyond the age of 50 years. There was a significant difference between males and females in the BMD of the mandibular angle and lumbar vertebrae in the 50–59, 60–69 and over 70 year age groups. The authors found that the BMD of mandibular angles correlates with that of lumbar vertebrae. This study suggests that measurement of mandible BMD could be used to predict osteoporosis.

Osteoporosis is a common disease , and problems associated with age-related osteopenia have received wide attention. Bone mineral density (BMD) is an important parameter of bone status . The vertebrae, forearm and hip are often associated with fractures in patients with osteoporosis, so they are popular sites for BMD measurements . Jaw bone is one of the most active parts of human skeleton, the relationship between jaw bone loss and general osteoporosis was reported in 1960 .

In recent years, methods for measuring general BMD have developed rapidly. Quantitative computed tomography (QCT) , digital panoramic tomography and dual-energy X ray absorptiometry (DXA) have been used to examine BMD of the jaw bone. Currently, DXA technology is widely used to measure BMD because it has high scan speed, high precision and accuracy, and uses a low radiation dose .

The decrease of BMD is more obvious in the mandible than in the maxilla, so the BMD of the mandible is usually measured. BMD attenuation can be monitored through measuring the mandibular BMD to prevent osteoporosis and reduce the risk of fractures in the elderly. BMD measurement can also aid in the diagnosis and treatment of some mandibular diseases and simultaneous tooth implantation. Mandibular bone loss is a significant factor that affects the preservation of teeth and denture construction. BMD measurement can provide references for the evaluation of dental implant indications and the effect of titanium implants on mandible fracture reconstruction.

Conclusions about the association between osteoporosis and BMD of jaw bone remain controversial . Most studies used DXA technology to measure skeletal BMD (femur and lumbar vertebrae), whereas standard digital panoramic tomography (SDPTG) was used to measure mandible BMD (cortical, alveolar bone and trabecular). The disparity may result from different methods, standards, or test locations.

The physical characteristics and BMD of different races also vary significantly due to heredity, living environment, living styles and habits. Even in those of the same race, there are differences between regions. In order to provide a normal reference for mandibular BMD, which is absent in China, and study the correlation between the BMD of the mandible and the lumbar vertebrae, the authors measured the BMD of the lumbar vertebrae and the mandible of normal adults in China with DXA.

Subjects and methods

224 healthy adult volunteers (111 males and 113 females) were recruited in China. None had any known medical conditions or were taking any medication that affected bone metabolism. The participants were divided into 6 age groups: 20–29, 30–39, 40–49, 50–59, 60–69 and over 70 years ( Table 1 ). A local ethics committee approved this study and informed consent was obtained from all volunteers.

Table 1
Number of study population in each group.
Age (years) Males ( n ) Females ( n )
20–29 21 23
30–39 20 21
40–49 21 22
50–59 20 21
60–69 17 15
70– 12 11
Total 111 113

The DXA scans were performed on a GE LUNAR (DPX-L or other model number) (GE LUNAR Company, USA). The BMD measurements were obtained from mandibular chin, bilateral mandibular angles and lumbar vertebrae (L1–L4). The positioning for the DXA scan of the mandibular chin was similar to that described by H orner et al. . For mandibular angle scanning, the participant laid horizontally on the bed with the head in the middle. The anterior DXA images of L1–L4, and the combined vertebral segments (L1–L4), of the lumbar spine were acquired with the region of interest (ROI) isolated for quantification of BMD and generation of the T- and Z-scores by the combined GE Lunar/NHANES III software. DXA-derived BMD values are expressed as areal density (areal BMD in g/cm 2 ). Quality assurance was performed by calibrating the DXA system with a spine phantom supplied by the manufacturer. According to the adsorption of low energy photos in different tissues, the DXA images of mandibular chin and mandibular angles were acquired at l46.8 keV and 100 keV. The area for BMD measurement was mapped manually on the mandibular chin ( Fig. 1 a ) and mandibular angle ( Fig. 1 b and 1c). 10 ROI were placed over each measurement area without overlapping. The size of each ROI was 1 cm 2 . The BMD values of each ROI were measured and averaged. The ROI excluded the area of impacted teeth that may introduce error in BMD measurement. The BMD of the lumbar vertebrae was analysed with DXA instrument software ( Fig. 1 d) and the results were used as standard reference.

Fig. 1
The area for BMD measurement in (a) mandibular chin, (b and c) mandibular angle, and (d) lumbar vertebrae.

Statistical analysis

The results of each group were analysed with SPSS 11.5 for Windows and JMTJFX 10.31 concise statistical software. The statistical analysis consisted of means, standard deviation, t test and the Newman–Keuls Q test.

Results

The average BMD of the mandibular chin, mandibular angle and lumbar vertebrae (L1–L4) was 1.3013 ± 0.2576, 1.0484 ± 0.1087 and 1.1195 ± 0.1373 g/cm 2 , respectively ( Table 2 ). The BMD of the mandibular chin was significantly higher than that of lumbar vertebrae. The BMD value of the mandibular angle was significantly lower than that of lumbar vertebrae.

Table 2
BMD of mandibular chin, mandibular angle, and lumbar vertebrae (g/cm 2 ).
Group Means Standard deviation Standard error
Mandibular chin 1.3013 0.2576 0.0172
Mandibular angle 1.0484 0.1087 0.0073
Lumbar vertebrae 1.1195 0.1373 0.0092

The BMD values of mandibular chin, bilateral mandibular angles and lumbar vertebrae in different age groups are shown in Table 3 . The change of BMD with age is showed in Fig. 2 . The BMD of lumbar vertebrae increased during the 20–39 year age period, and reached its peak by 49 years of age. Beginning at the age of 50 years, the BMD of lumbar vertebrae decreased in males and females. A sharp decrease was observed, only in females, in the period 50–59 years of age. The BMD of mandibular chin and mandibular angle was relatively stable in those 20–49 years of age. Consistent with the findings in lumbar vertebrae, the BMD of mandibular chin and mandibular angle also showed a decrease after 50 years in both genders. Only in females, but not in males, the BMD of the mandibular angle exhibited an obvious decrease during the 50–59 year age period. Compared with mandibular chin, the change of BMD with age in mandibular angle showed a similar pattern to that in lumbar vertebrae.

Table 3
BMD values g/cm 2 of mandibular chin, mandibular angle and lumbar vertebrae for different age groups and genders.
Age(year) Male Female
Mandibular chin Mandibular angle Lumbar vertebrae Mandibular chin Mandibular angle Lumbar vertebrae
20–29 1.471 ± 0.311 1.130 ± 0.064 1.170 ± 0.057 1.319 ± 0.264 1.099 ± 0.042 1.147 ± 0.124
30–39 1.402 ± 0.192 1.108 ± 0.051 1.187 ± 0.087 1.371 ± 0.182 1.102 ± 0.069 1.185 ± 0.072
40–49 1.482 ± 0.340 1.105 ± 0.071 1.232 ± 0.124 1.344 ± 0.236 1.086 ± 0.045 1.197 ± 0.080
50–59 1.299 ± 0.226 1.068 ± 0.045 1.169 ± 0.057 1.188 ± 0.110 1.014 ± 0.074 1.015 ± 0.149
60–69 1.267 ± 0.171 1.047 ± 0.062 1.122 ± 0.092 1.155 ± 0.098 0.900 ± 0.083 0.949 ± 0.040
>70 0.997 ± 0.058 0.893 ± 0.051 0.936 ± 0.065 0.982 ± 0.080 0.798 ± 0.112 0.882 ± 0.057
Only gold members can continue reading. Log In or Register to continue

Stay updated, free dental videos. Join our Telegram channel

Jan 27, 2018 | Posted by in Oral and Maxillofacial Surgery | Comments Off on Study of mandible bone mineral density of Chinese adults by dual-energy X-ray absorptiometry

VIDEdental - Online dental courses

Get VIDEdental app for watching clinical videos