Interrelationship between the position of impacted maxillary canines and the morphology of the maxilla

Introduction

The aim of this study was to examine whether there is a relationship between the position of impacted maxillary canines and the morphology of the maxilla.

Methods

The palatally impacted canine group included 18 boys and 27 girls with an average age of 12 years 9 months (±2 years 1 month). The buccally impacted canine group comprised 19 boys and 26 girls with an average age of 12 years 2 months (±1 year 4 months). Arch length/intermolar width × 100 was used as the value for comparison of maxillary arch shapes, and palatal vault depth/intermolar width × 100 was used to compare the shapes of palate between the 2 groups. Each category was directly measured from the diagnostic model.

Results

Both the arch length/intermolar width × 100 and the palatal vault depth/intermolar width × 100 formulas showed statistically significant differences ( P <0.0001), indicating differences in the shape of maxillary arch and the palatal vault between the 2 groups.

Conclusions

The shape of the maxillary arch was narrower and longer in the palatally impacted canine group compared with the buccally impacted canine group, and the palatally impacted canine group had a deeper palatal vault than did the buccally impacted canine group.

Eruption disturbance including impaction is a frequently observed problem in a series of processes that results in conversion from the deciduous to the permanent dentition. Every tooth can potentially experience such problems. In general, the maxillary canines, with the exception of the third molars, are the most susceptible, and the prevalence of maxillary canine impaction has been reported to be in the range of 1% to 5%.

The definition of impaction varies among clinicians. By summing up the definition, in pathologic terms, impacted teeth can be defined as a state when a tooth remains embedded in the oral mucosa or bone past its normal eruption period. However, the clinical definition of impacted teeth can be broadened to include teeth that are predicted to undergo an abnormal eruption process or teeth that are causing root resorption of the adjacent teeth, even before the normal eruption period.

Many studies on maxillary canine impaction have been carried out. Therefore, it is known that maxillary canine impaction occurs 2 to 3 times more often in girls than in boys. In general, it has also been reported that palatal impaction of maxillary canines occurs 3 to 6 times more often than buccal impaction. However, most of these studies were with white subjects. Since Oliver et al suggested that the trend of maxillary canine impaction in Asians would differ from that of white people, the recent studies have reported that buccal impaction of maxillary canines occurs 2 to 3 times more often than palatal impactions in Asians of Korean and Chinese descent.

Most maxillary canine impactions diverge from the normal eruptive site in either the buccal or the palatal direction. According to the studies thus far, the etiologies of these 2 phenomena appear to differ. Palatally impacted canines are related to excessive space in the dental arch. Jacoby, disclosing that 85% of palatal impactions have sufficient space for eruption and 83% of buccal impactions have insufficient space for eruption, was the first to propose that excessive space causes palatally impacted canines. Subsequent studies have discovered crowding only in a few subjects with palatally impacted canines and excessive space often observed. On the contrary, it has been reported that buccally impacted canines are closely related to crowding. The tooth germ of the maxillary canine lies buccally on the buds of the lateral incisor and the first premolar during the growth and development stage. Accordingly, if there is insufficient space for canine eruption due to crowding, it becomes difficult for the canine to erupt into its normal position, thereby forcing it to remain on the buccal side.

The relevance between the anomalies of lateral incisors and palatally impacted canines has been a well-known fact for a long time. Similarly, it has been reported that the mesiodistal dimensions of maxillary teeth including the incisors were reduced significantly in palatally impacted canines. On the contrary, the mesiodistal width of the maxillary incisors in buccally impacted canines cases tends to be larger than in patients with palatally impacted canines. Moreover, the development stage of the dentition is also related to the position of the impacted canines. Palatally impacted canines occur mainly in patients with a normal or belatedly developed dentition, and do not occur frequently in early developing dentitions.

A different etiology was discussed by McConnell et al, who implicated a deficiency in maxillary width as a local mechanical cause for palatally impacted canines. They also concluded that maxillary orthopedic expansion would be an interceptive modality in treating patients with palatally impacted canines. Schindel and Duffy also stated that maxillary transverse discrepancies increase the possibility of canine impaction. However, Langberg and Peck observed no statistically significant difference in the anterior and posterior maxillary arch widths between subjects with palatally impacted canines and the control samples. Moreover, Al-Nimri and Gharaibeh even reported that subjects with palatally impacted canines has greater maxillary transverse arch dimensions. Therefore, more studies should be carried out on how the morphology of the maxilla affects canine impaction.

The specific mechanism underlying maxillary canine displacement has not been identified yet. Two general theories have been proposed to explain the phenomena of maxillary canine impaction. The first is the guidance theory. As evident from the title, this theory asserts that the displacement of a maxillary canine can occur when the guiding function of the lateral incisor is lost. However, it is difficult to expand this theory for patients with buccally impacted canines, and it is more likely that buccally impacted canines are caused by an abnormal genetic pattern. The second theory is the genetic theory, which asserts that the location of canine eruption is determined by deciduous tooth germ displacement. Moreover, this theory is supported by several studies that have proven that palatally impacted canines are significantly associated with other dental anomalies. Nonetheless, it is still difficult to explain impaction of maxillary canines with only 1 mechanism.

The purpose of this study was to examine whether there is a relationship between the position of impacted maxillary canines and the morphology of the maxilla.

Material and methods

This study was approved by the institutional review board at the School of Dentistry of Seoul National University in Korea (S-D20100003). Patients who received orthodontic diagnoses at the Dental Hospital of Seoul National University for treatment of impacted maxillary canines between 2005 and 2010 were enrolled. These patients were clearly diagnosed with maxillary canine impactions. To make an exact diagnosis, data including computed tomography images were collected. Diagnosis criteria of the evident maxillary canine impaction were as follows: (1) eruption difference of more than 1 year compared with the canine on the opposite side, (2) unerupted canine more than 1 year after all permanent teeth had erupted, and (3) root resorption of the adjacent tooth caused by the canine. In addition, the exclusion criteria were as follows: (1) patients whose canine was distally impacted toward the first premolar, (2) patients with definitive obstructions (eg, odontoma or supernumerary teeth), (3) patients with a systemic disease, (4) patients with craniofacial anomalies (eg, cleft lip or palate), and (5) patients with several impacted teeth or congenitally missing teeth. The ages of the subjects who satisfied these criteria were between 10 and 18 years.

The bucco-palatal position of the impacted canine was determined on the computed tomography image with the lateral incisor root as the reference. Palatal impaction was defined as the canine crown tip more palatally positioned than the root of the lateral incisor, and the opposite was defined as buccal impaction. The initial subjects included 123 patients with buccally impacted canines and 46 patients with palatally impacted canines; 29 patients had bilateral maxillary canine impactions. Patients with bilateral impaction were included if the position of impaction was the same on both sides, but those with opposite impaction positions were excluded. There was 1 such subject in this study. Thus, 28 bilateral impaction subjects were included in this study. They were divided into 2 groups, palatally impacted canine and buccally impacted canine groups. The palatally impacted canine group comprised 45 subjects, 18 boys and 27 girls, with an average age of 12 years 9 months (±2 years 1 month). Forty-five subjects were selected randomly for the buccally impacted canine group to ensure a sample distribution (age and sex ratio) similar to that of the palatally impacted canine group. As a result, the buccally impacted canine group included 19 boys and 26 girls with an average age of 12 years 2 months (±1 year 4 months).

First, the ratio of arch length to intermolar width was the value used to compare the maxillary arch shapes between the 2 groups. This ratio was computed by arch length/intermolar width × 100 ( Fig 1 , A ). Arch length was defined as the distance from the incisal edge of the maxillary central incisors to the line that links the distal ends of the right and left first molars. Intermolar width was defined as the distance between the mesiobuccal cusp tips of the first molars. If the anteroposterior position of the left and right maxillary central incisors differed for reasons including crowding, the values on the right and left were measured, and the average value was used. In case of difficulties in determining the location of the incisal edge of the central incisors for reasons such as rotation, the measurement was taken from the most labial side. All values were measured to an accuracy of 0.01 mm with a digimatic digital caliper (Absolute; Mitutoyo, Kawasaki, Japan).

Fig 1
A, Measurements for the comparison of maxillary arch shape: arch length/intermolar width × 100; B, measurements for the comparison of palatal vault shape: palatal vault depth/intermolar width × 100; C, measurements to predict the eruption space for the maxillary permanent dentition: sum of the widths of the 4 maxillary incisors/available arch space × 100.

Second, the ratio of palatal vault depth to intermolar width was used to compare the shape of the palate between the 2 groups. This ratio was computed by palatal vault depth/intermolar width × 100 ( Fig 1 , B ). The depth of the palatal vault was defined as the vertical distance from the contact line between the mesiopalatal cusp tips of the right and left first molars to the palatal vault. This distance was measured by using a Bernklau plate (Kwangmyung Dacom, Seoul, Korea) and the digimatic digital caliper.

Third, the value resulting from the following equation was used to determine whether there was insufficient eruption space for the maxillary permanent dentition: sum of the widths of the 4 maxillary incisors/available arch space × 100 ( Fig 1 , C ). This parameter can be used in patients with both permanent and mixed dentitions, who were included as subjects in this study. Available arch space was defined as the space measured through the points of contact between adjoining teeth from the mesial surfaces of the right to the left first molars.

All parameters were measured directly on the diagnostic models. Each parameter was measured twice, and the average was used for analysis.

Examination of the dissected skull of an 8-year-old girl showed that the maxillary canine is surrounded by the nasal cavity, orbit, and anterior wall of the maxillary sinus. Accordingly, the widths of the nasal cavity and the nostrils were measured on computed tomography images to determine whether there was a relationship between nasal cavity width and impacted canine position in our subjects. Computerized tomographic imaging was performed for each subject by using SOMATOM Sensation 10 (Siemens AG, Erlangen, Germany) with a slice thickness of 0.75 mm. The width of the nasal cavity was measured at the widest part of the lower third of the nasal cavity closest to the maxilla in the coronal section ( Fig 2 , A ). The width of the nostrils was measured at the widest region in the horizontal section ( Fig 2 , B ).

Fig 2
A, Width of the nasal cavity; B, width of the nostrils.

Statistical analysis

An independent 2-sample t test was carried out to compare the 2 groups. Statistical analysis was performed by using SPSS for Windows software (version 12.0; SPSS, Chicago, Ill). The level of statistical significance was set at 5%.

Results

To measure intraexaminer agreement, 10 randomly selected subjects from each group were reevaluated 2 weeks later. No significant intraexaminer differences were noted, with a Cohen’s kappa coefficient of 0.833.

The average values and standard deviations for each item in the 2 groups are given in the Table . Both the arch length/intermolar width × 100 and the palatal vault depth/intermolar width × 100 formulas showed statistically significant differences ( P <0.0001), indicating differences in the shapes of the maxillary arch and the palatal vault between the 2 groups. Moreover, the depth of the palatal vault showed highly significant differences between the 2 groups with an absolute distance. However, the inclination of the maxillary central incisors can affect the measurement of the arch length. Therefore, the angles between the maxillary central incisor and the sella-nasion plane were measured and found to be 106.6° ± 5.4° in the buccally impacted canine group and 103.5° ± 10.3° in the palatally impacted canine group, and the difference was not statistically significant ( P = 0.203). It can be concluded that the inclination of the maxillary central incisors had no effect on the comparison of maxillary arch shape.

Apr 8, 2017 | Posted by in Orthodontics | Comments Off on Interrelationship between the position of impacted maxillary canines and the morphology of the maxilla

VIDEdental - Online dental courses

Get VIDEdental app for watching clinical videos