Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis

Abstract

Objectives

A systematic review was conducted to assess the effects of air-particle abrasion procedures on the mechanical strength and phase transformation of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP).

Data

This report followed the PRISMA Statement. From 1013 eligible studies, 78 were selected for full-text analysis, from which 37 were excluded. The 41 remaining papers were included for the systematic review; hand-searching yielded three papers. The review comprised a total of 44 studies; 21 were included in the meta-analysis.

Sources

Searches were performed with no publication year limit through November 2015 in PubMed/MEDLINE, Web of Science (Core Collection) and Scopus databases.

Study selection

In vitro studies evaluating the effect of air-particle abrasion protocols on the mechanical strength and/or phase transformation of Y-TZP zirconia specimens, immediately or after aging. For the meta-analysis, flexural strength data of air-particle abrasion vs. control (nonabraded) were globally and subgroup analyzed. Subgroup analyses assessed blasting parameters (particle size, pressure, or time duration) and the effect of aging. Statistical analyses were conducted using RevMan 5.1 (Cochrane Collaboration, Copenhagen, Denmark). Comparisons were performed with random-effect models at a 5% significance level. Phase transformation data were included only in the systematic review, as insufficient data were available for meta-analysis.

Conclusions

Airborne-particle abrasion improved flexural strength of Y-TZP, regardless of abrasion parameters and the presence or lack of aging ( p ≤ 0.05). Phase transformation tended to be increased by air abrasion immediately or with up to 2 h of aging. However, after aging for 12 h or more, the abraded Y-TZP showed less monoclinic content than the control.

Introduction

Zirconia-based ceramics, especially yttria-stabilized tetragonal zirconia polycrystal (Y-TZP), are the most extensively studied class of ceramics, mainly regarding the strength and toughness of the materials . The toughness relates to the tolerance to damage of the ceramics through the phase transformation process (tetragonal–monoclinic, t→m). This transformation is accompanied by 3–4% volume expansion, inducing compressive stresses that close crack tips and thus prevent further crack propagation . These properties enable Y-TZP to be clinically available as an alternative to metal frameworks for fixed dental prosthesis (FDPs) and recently for monolithic zirconia restorations , as this last approach may be a solution to avoid the fracture and/or chipping of the veneering porcelain .

The survival of Y-TZP restorations relies on, among other aspects, the durability of the bonded interfaces, which are the weakest components of these restorations . In an attempt to overcome the limitations of the bonded interfaces, surface conditioning procedures based on airborne-particle abrasion protocols are commonly employed, as this procedure cleans the ceramic surface, removes impurities, increases surface roughness, and modify the surface energy and wettability . The abrasion protocols involve impacting the target surface with hard particles at high velocities, thereby eroding the material and leaving a roughened surface with expected higher wettability . Airborne-particle abrasion protocols applied to Y-TZP surfaces have been shown to induce protective compressive residual stresses from the t→m phase transformation, thereby initially increasing the flexural strength. However, stress-generating surface treatments are otherwise shown to alter the structural stability, increase the susceptibility to long-term degradation, and promote cracks and damage to the near-surface zone in ceramics .

Although abrasion protocols are widely used in clinical practice, reports in the current literature on effects on the mechanical properties and structural stability of Y-TZP remain unclear. Among the studies, airborne-particle abrasion has been reported to both increase and decrease the mechanical strength of ceramics and to promote varied percentages of phase transformation in Y-TZP . These contradictory findings may result from the diverse protocols used, with variations in particle size and pressure, as well as the presence or lack of aging conditions. This systematic review assessed the available scientific literature, investigating the follow research question: Do surface conditioning procedures based on airborne-particle abrasion protocols affect the mechanical strength and phase transformation of Y-TZP ceramics?

Methods

This systematic review was conducted according to the PRISMA statement . The PICOS strategy was used to guide the research question construction. The population comprised specimens of any geometry made from Y-TZP. The intervention was characterized by surface conditioning procedures based on airborne-particle abrasion protocols, with applications of any particle size and pressure. Only studies that had a control group without surface conditioning were selected for review. The mechanical strength and phase transformation of Y-TZP were the outcomes of interest, assessed only from in vitro studies.

Search strategy

A comprehensive literature search was undertaken through the MEDLINE (National Library of Medicine) via PubMed, Web of Science (Core Collection) and Scopus databases to identify relevant articles through November 2015 with no limit on publication year. Specific medical subject headings (MeSH) and key words (“free-text words”) were used as search terms. The electronic database searches were undertaken independently by two of the authors (I.L.A. and A.M.E.M.) using the following search strategy words and terms: ((((((((zirconium [MeSH Terms]) OR zirconi*) OR yttria*) OR y-tzp) OR y tpz)) AND (((((((((((Air Abrasion, Dental [MeSH Terms]) OR Air Abrasion*, Dental) OR Abrasion*, Dental Air) OR Air Abrasion*) OR airborne particle) OR airborne-particle) OR silica coating) OR silica-coating) OR air particle) OR air-particle) OR sandblasting)) AND (((((((((((strength) OR resistance) OR flexural*) OR fatigue) OR aging [MeSH Terms]) OR aging) OR ageing) OR structural stability) OR phase transformation) OR long term) OR long-term)).

Eligibility criteria

The criteria for inclusion of studies were the reporting of in vitro evaluations of the effects of airborne-particle abrasion protocols on: (a) the mechanical strength, regardless of the mechanical testing configuration adopted (uni- or biaxial; static or cyclic loading) and/or (b) phase transformation on specimens with any geometry made from Y-TZP, either immediately or after any type of aging.

The final decision on the inclusion of a given study was made based on the full-text papers of the potentially relevant studies, in accordance with the exclusion criteria: only studies that had proper control groups without surface conditioning were included. Studies with experimental groups in which technical procedures were performed on the specimens after sandblasting, such as thermal treatments or sintering, were excluded, as they did not enable the assessment of the isolated effect of sandblasting. For studies assessing the mechanical strength, the data were required to be reported as mean in megapascals (MPa) and standard deviation (SD), sandblasting was required to have been performed only on the surface subjected to tensile stress during testing, and bilayer samples were not accepted. Studies evaluating the phase transformation of Y-TZP were required to report at least one outcome supported by quantitative data such as the relative amount of transformed monoclinic zirconia ( F M ) or the transformed zone depth (TZD). Studies that did not enable the evaluation of the effect of sandblasting in isolation on the phase transformation were also excluded. Studies that did not provide all required data, even after at least two attempts to contact the authors via e-mail, were also excluded.

Screening and selection

First, the titles and abstracts were reviewed independently by two of the authors (I.L.A. and A.M.E.M); the studies were selected for full-text reading if the titles and abstracts met the inclusion criteria. In a second stage, abstracts reviewed in the first step were selected with the consensus of both authors. If a consensus was not reached, the abstract was set aside for further evaluation. In the third step, the full-text articles corresponding to the abstracts selected in the second step were retrieved and reviewed by the two authors. Inclusion in this review was based on consensus between the two investigators. Disagreements were discussed with a third author (A.F.M.). Finally, the reference lists of all articles selected in the third step were manually reviewed, and the full texts of studies that could potentially fulfill the inclusion criteria were examined.

Data extraction

A protocol for data extraction was defined and evaluated by two of the authors (I.L.A. and A.M.E.M.). Data were extracted independently from the full-text articles selected for inclusion using a standardized form in a program (Office Excel 2013 Software, Microsoft Corporation, Redmond, WA, USA). The authors categorized similar information into groups according to the two main outcomes of interest of mechanical strength and phase transformation. The authors of the selected studies were contacted via e-mail if data were missing or more information was needed when studies did not report the precise values of flexural strength (mean and SD) or t→m phase transformation (by F M or TZD), or when the articles reporting the studies presented the results in graphs or figures.

Assessment of risk of bias

The evaluation of the risk of bias was based on and adapted from a previous study . The quality of studies evaluating mechanical strength and that of studies evaluating phase transformation were assessed separately. The quality assessment for studies evaluating mechanical strength was performed according to the following parameters: (a) randomization of specimens, (b) standardization of obtaining of samples, (c) standardization of airborne-particle abrasion procedures (time, pressure, and distance), (d) single-operator protocol execution, (e) description of sample size calculation, (f) blinding of the operator of the testing machine, and (g) performance of specimen dimensioning, test designs, and flexural strength calculations according to standard specifications such as ISO or ASTM. For the quality assessment of studies on phase transformation, the parameters (a)–(d) used to assess the studies evaluating mechanical strength were retained. Further, the blinding of the operator during phase transformation analysis by methods such as X-ray diffraction or Raman analysis was also considered. If the authors reported the parameter clearly, the paper received a score of 0 for that specific parameter; if a particular parameter was reported but was inadequate or unclear, the paper received a score of 1; and if it was not possible to find the information, the paper received a score of 2. For studies evaluating mechanical strength, papers that received scores from 0 to 4 were classified as having a low risk of bias, 5 to 9 as medium-risk, and 10 to 14 as high-risk. For those on phase transformation, papers scored from 0 to 3 were classified as low-risk, 4 to 7 as medium-risk, and 8 to 10 as high-risk.

Data analysis

For the meta-analysis, the flexural strength data of air-particle abrasion compared to those of the control groups were analyzed both globally and by subgroup. Subgroup analyses assessed the effects of different blasting parameters such as particle size, pressure, or time duration and the presence or absence of aging conditions. For subgroup analyses involving the air-particle abrasion parameters, two strata were created for each parameter.

Every possible comparison was performed; when appropriate, specific formulas were applied to combine multiple values into single sample sizes, mean values, and standard deviations for the experimental, control, or both groups within a given study . In the subgroup analyses, each distinct blasting parameter and the presence or absence of aging conditions resulted in one possible comparison, even for studies subjected to the data-combining strategy. For the studies assessing aging procedures or other interventions, such as grinding or polishing, in addition to particle abrasion, the comparisons between the abraded and control groups necessarily involved the presence of aging or the other intervention in both groups, resulting in a single possible comparison correlating to each condition.

The pooled effect estimates were obtained by comparing the means of each of the flexural strength values; the estimates were expressed as the raw mean difference among the groups. A p value ≤ 0.05 was considered to be statistically significant ( Z test). The heterogeneity of the treatment effects among the studies was assessed using both Cochran’s Q test and the inconsistency I 2 test, in which values greater than 50% were considered to indicate substantial heterogeneity . All analyses were performed using a random-effect model, using Review Manager Software version 5.1 (Cochrane Collaboration, Copenhagen, Denmark).

Meta-analysis was performed only for the flexural strength data. The phase transformation data were not included in the meta-analysis, as the studies provided insufficient data and the information required for meta-analysis was missing. Thus, the phase transformation data were included only in the systematic review and analyzed descriptively.

Only gold members can continue reading. Log In or Register to continue

Stay updated, free dental videos. Join our Telegram channel

Nov 23, 2017 | Posted by in Dental Materials | Comments Off on Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis

VIDEdental - Online dental courses

Get VIDEdental app for watching clinical videos