Antimicrobial properties of conventional restorative filling materials and advances in antimicrobial properties of composite resins and glass ionomer cements—A literature review

Highlights

  • Antimicrobial activity of restorative materials is an important property.

  • Introduction of antimicrobial properties to restorative materials should not cause deterioration of material physical and chemical properties.

  • Long term assessment of antimicrobial restorative materials is necessary.

  • Further research on standardization of antimicrobial testing of restorative materials is required.

Abstract

Objectives

It has been reported that complete caries removal from cavities during restoration of teeth is difficult. Furthermore with the tissue saving approach it is expected that more of the saved affected tissue will possibly harbor more residual bacteria. Antimicrobial restorative filling materials would be ideal to prevent the spread of caries after completion of tooth restoration, thus preventing recurrent decay and eventually restoration failure. This paper reviews the literature on the antimicrobial properties of dental restorative filling materials.

Methods

Pubmed searches on the antibacterial properties of restorative materials were carried out. Keywords were chosen to assess antibacterial properties of conventional filling materials. Methods of introducing antimicrobial agents in restorative materials were also reviewed together with the methodology used to assess antimicrobial activity.

Results

174 articles from 1983 till 2014 were included.

Significance

Adhesive materials have decreased antimicrobial activity when compared to amalgams and zinc oxides. Several techniques have been employed in order to increase the antimicrobial activity of restorative materials. Although antimicrobial activity of restorative materials is important, the introduction of antimicrobial agents/techniques should not be at the expense of other material properties. Environmental changes within a material may affect the bacterial response to the antimicrobial. Bacterial adhesion to the restorative materials should be assessed. Long term assessment of antimicrobial activity is important and is clinically relevant. The use of antimicrobial dental materials is important unless such characteristics are gained to the detriment of other material properties.

Introduction

The rate of dental caries following restorative treatment is claimed to be high , with some authors claiming values up to 50–60% . Secondary caries is also claimed as the main reason of failure of composite resin or glass-ionomer cements (GIC) restorations . More than half of the restorations placed in the United States in 2005 were replacements of failed restorations, with composite restorations showing higher failure rates and more recurrent decay when compared to amalgam, which may be due to the higher antibacterial properties of amalgam when compared to composite . Composites have been claimed to result in more plaque accumulation than other materials , which may also be the cause of the increased rates of recurrent decay experienced with this material .

Secondary decay occurs most commonly at the interface between the restoration and the cavity prepared . The tooth structure is demineralized following invasion of acid producing bacteria, such as Streptococcus mutans , when fermentable carbohydrates are present . Therefore, an effective antibacterial/bactericidal restorative material would be in the ideal location to prevent secondary decay , especially since it has been shown that cariogenic bacteria, mainly S. mutans , adhere to restorative materials .

Another issue is that nowadays, a more conservative approach of caries removal is suggested by the literature . Through this tissue-saving approach, it is expected that more affected tissue will be saved and possibly will harbor more residual bacteria . These facts highlight the need for development of adhesive materials with antibacterial properties that prevent colonization of bacteria at the tooth to material interface, without the creation of resistant strains. This would theoretically prevent recurrent decay, allow more conservative removal of caries , and influence the extent of micro-leakage, which has been shown to influence pulpal inflammation beneath cavities in vivo . The use of materials with antibacterial or bactericidal effects would also provide an adjunct treatment by suppressing residual infection and increase the survival of the restored tooth especially in minimally invasive approaches .

Several attempts have been made to introduce antimicrobial properties in restorative materials , but some of these attempts resulted in compromized physical properties of the novel material . The changes in composition carried out to introduce antibacterial properties or leaching of particles may affect the material’s strength, making it then unsuitable as a restorative material or restrict its use to non-loadbearing areas . Another issue may be problems with change in color, as seen with the introduction of silver nanoparticles to light curable resins , which may in turn restrict the use of the material to posterior restorations. Another property that may be altered is the material’s adhesion to the tooth. Decreased bond strength when compared to the conventional material is not ideal as this would increase the chances of micro-leakage and as a result, recurrent decay .

The aim of this paper is to review the literature to investigate the current status of antibacterial properties of filling materials, with particular emphasis on advances to resins, bonding systems and glass ionomer cements and on the mechanisms on how the antibacterial properties were achieved and assessed. The review looks into antibacterial properties of conventional restorative materials and then highlights different methods used to improve antibacterial properties of currently used materials. Methodologies used to assess antibacterial properties were also highlighted.

Articles in English related to antimicrobial properties of dental restorative materials from 1983 till 2014 were included. The PubMed search included literature reviews, in vitro and in vivo studies. Articles written in other languages, without available abstract, those related to other fields of restorative dentistry were excluded. Keywords related to restorative materials and specific materials were used. A search using “antibacterial dental material” resulted in 1958 hits; therefore more specific phrases were used to narrow down the search. Keywords used, number of articles chosen, hits per keyword and date of earliest and latest article per search are shown in Table 1 .

Nov 23, 2017 | Posted by in Dental Materials | Comments Off on Antimicrobial properties of conventional restorative filling materials and advances in antimicrobial properties of composite resins and glass ionomer cements—A literature review

VIDEdental - Online dental courses

Get VIDEdental app for watching clinical videos