6: Oral Surgery for the General Practitioner

6 Oral Surgery for the General Practitioner

Advances in technology continue to expand the scope of the dental profession. The present curriculum at many dental schools incorporates the latest technology, including digital radiography, cone-beam computed tomography, dental implants, and lasers. The use of laser technology in particular has become increasingly popular in recent years. General practitioners, as well as specialists, are taking advantage of the continuous advances in laser technology and are now routinely using lasers to perform a variety of procedures.

The specialty of oral and maxillofacial surgery (OMS) has benefited from the use of lasers since the mid-1960s,1 with the first documented use of a laser in OMS in 1977.2 Lasers are quickly becoming the standard of care for many surgical procedures, given the advantages of improved visualization, hemostasis, and reduced discomfort. The introduction of lasers that incorporate computer interface technology has made lasers much more “user friendly,” contributing to their popularity in the dental profession. Manufacturers are also addressing the need for mobility and designing lighter, more portable equipment, making lasers easier to maneuver from room to room. Laser handpieces have interchangeable components that are more ergonomic and versatile, allowing better control when performing exacting procedures in the confines of the oral cavity.

Intraoral Lasers

Understanding laser physics and laser light’s biological interaction with tissues is essential when determining the appropriate laser for any given procedure. A wide array of lasing media with unique radiant-energy wavelengths has been employed successfully for varying indications and types of tissue, including the argon (Ar), carbon dioxide (CO2), erbium:yttrium-aluminum-garnet (Er:YAG) and erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG), holmium:YAG (Ho:YAG), neodymium:YAG (Nd:YAG), potassium titanyl phosphate (KTP), pulsed dye, and diode lasers.3 The diode, Nd:YAG, erbium, and CO2 lasers are the most common intraoral lasers because of their wavelength-dependent properties (see Chapter 2).

Neodymium:YAG Laser (1064 nm)

The Nd:YAG laser’s active medium is a crystal of yttrium, aluminum, and garnet doped with neodymium ions.6 By functioning in the near-infrared part of the spectrum at 1064 nm, the Nd:YAG laser exhibits minimal surface tissue absorption and maximal penetration; this allows for coagulation of tissue in depth.7 The optical delivery is free-running but must be in the “pulsed” mode because of Nd:YAG’s ability to penetrate deeply into soft tissues. Romanos8 believed that most procedures could be performed without local anesthesia because the pulse duration is shorter than the time required to initiate a nerve action potential.

Comparing Nd:YAG laser surgery to conventional scalpel surgery, White et al.9 concluded that the laser could be used successfully for intraoral soft tissue applications without anesthesia and with minimal bleeding. When the procedure involves significant ablation or resection of tissue, local anesthesia is necessary for patient comfort.7

As with the diode lasers, the Nd:YAG laser can be used in a contact (excision) and a noncontact (coagulation) mode. These properties have led to its use in a variety of maxillofacial procedures, including coagulation of angiomatous lesions, hemostasis in bleeding disorders, arthroscopic surgery of the temporomandibular joint (TMJ), resections in vascular tissues (in combination with CO2 wavelength), and palliation of advanced neoplasms.10 The Nd:YAG laser has demonstrated some benefit with minimally invasive periodontal therapies, including sulcular debridement and bacterial decontamination, resulting in potential new attachment of gingival tissues, regeneration of supporting bone, and regrowth of periodontal ligament11 (see Chapters 3 to 5).

Carbon Dioxide Laser (10,600 NM)

The CO2 laser has become the workhorse for intraoral soft tissue surgery. The emitted wavelength of 10,600 nm has ideal absorption by soft tissue because soft tissue is composed of 90% water, and CO2 has excellent absorption in water. Cellular rupture occurs from the photothermal effect when intracellular water absorbs the energy from the CO2 laser. The cellular vaporization is the basis for the CO2 laser to function as a surgical tool.3 The wavelength allows for absorption into soft tissue, very quickly generating heat conducted into the surrounding tissue, and creates a very narrow zone of thermal necrosis approximately 500 µ or less.17 Lateral thermal damage of such a small area is an excellent advantage of CO2 laser use, because it results in coagulation of vessels up to 500 µ in diameter and is clinically manifested by hemostasis and sealing of the lymphatics, which has been found to reduce postsurgical bacteremia compared with other methods of incision.18

The learning curve tends to be slightly higher with the CO2 laser because it is the only soft tissue laser used without direct tissue contact. The delivery system is either an articulated arm or a hollow waveguide. The hollow waveguide requires the use of higher power because significant laser energy is absorbed internally by the laser delivery system. These delivery systems are acceptable when one has direct vision in the confines of the oral cavity. However, when performing endoscopic and microscopic surgical procedures in which clinicians are challenged by limited visibility of an area, a flexible core system can provide a needed advantage. Development of the BeamPath fiber allows laser energy to be transmitted by an innovative photonic band-gap omnidirectional dielectric mirror lining, which guides the light through a flexible hollow core.19

The CO2 laser energy can be transmitted in several different modes, including continuous, chopped/gated pulse, and various “superspeed” and “ultraspeed” modes. Lasers are generally perceived as a continuous beam of light. Dispersion of CO2 laser energy in this manner is associated with a continuous wave. Continuous-wave (CW) CO2 lasers were the forefront of technology in the 1970s and proved to be successful in medicine. However, the constant emission of laser energy delivered very high energy densities, causing unnecessary injury to the soft tissues. As this technology progressed, a shutter was integrated into CW lasers, causing interruption (gating, or chopping) of the continuous wave. These units delivered fluences of approximately 1200 to 1500 mJ/cm2 of energy density. This development limited the use of these lasers in microsurgical applications. Newer laser technology can also operate in a pulsed-wave (PW) mode, meaning the energy bursts on and off very quickly. PW laser energy creates an instant burst of light energy, achieving a greater peak power than the CW mode.

Superpulsed CO2 lasers were designed to regulate the energy density transmitted to soft tissue. By changing the radiofrequency of the pumping mechanism in the laser, the pulsewidth and speed of transmission could now be predetermined. The superpulsed mode of transmitting CO2 energy improved the working speed of pulses to 400 to 800 microseconds and decreased the energy density to 180 to 300 mJ/cm2 on soft tissue. A direct result of the decreased energy density was less carbonization and charring, which resulted in a more consistent healing process in soft tissue procedures.

The next generation of technology currently on the market can create pulses of 20 to 80 milliseconds while generating a peak power of 320 W. However, the smaller beamwidth reduces the energy density transferred to the tissues. This technology can produce an extremely thin incision at depths of up to 4 to 5 mm in a single pass without carbonization or tissue damage. Many superficial soft tissue procedures using this technology generally do not require injectable anesthetics because of the minimal absorption depth of 0.10 mm, reducing lateral thermal damage and frequently resulting in minimal or no bleeding, discomfort, or swelling during the surgery and postoperative period.

Advantages and Disadvantages of Laser Surgery

Benefits

The benefits of using lasers in oral surgical procedures are significant, both for the dental surgeon and the patient. Laser light is monochromatic, coherent, and collimated; therefore it delivers a precise burst of energy to the targeted area. Laser energy incises tissue more efficiently than the scalpel, generates complete vaporization, and coagulates blood vessels. For contouring procedures, the laser is perhaps the surgical instrument of choice because of its ability to sculpt soft tissues by selective ablation.

The hemostatic effect created when the laser’s energy interacts with the soft tissue eliminates excessive bleeding, a factor that has traditionally discouraged dentists from performing surgery, and creates a clean surgical field, allowing increased precision and accuracy and greatly improving visualization of the surgical site, making laser surgery as straightforward as other dental procedures.

Examined histologically, laser wounds have been found to contain a significantly lower number of myofibroblasts.20 This results in less wound contracture or scarring and, ultimately, improved healing.21,22 Mobility to the dynamic tissues (lips, tongue, floor of mouth, soft palate) is attained more readily postsurgically. As a result of improved healing and hemostasis, intraoral laser wounds can often be left without sutures, healing by secondary intention, except when cosmesis is a concern.

With laser technology, the patient typically experiences less postoperative swelling and pain.23,24 A compromised airway during oral surgery is less of a concern, partly because of the decreased swelling. Although not always predictable, the decreased postoperative pain can be managed with over-the-counter (OTC) nonnarcotic oral analgesics (e.g., ibuprofen) for most laser procedures. The physiology of this effect is still unknown but most likely correlates with decreased tissue trauma and an alteration of neural transmission.7

Because the patient has a painless surgical experience with minimal postoperative complications, many procedures are performed on an outpatient basis. Patients can often return to work within 1 day or even immediately after surgery.

Drawbacks

Despite the laser’s many advantages, when determining the appropriate treatment for a patient, the clinician also must consider its drawbacks. Although the healing process following laser surgery is generally marked by decreased scarring and increased function, some have found that the speed of healing is slightly prolonged compared with other types of wounds.25 This delay in healing is undoubtedly caused by the sealing of blood vessels and lymphatics and subsequent need for neovascularization in healing. Typical intraoral healing after laser surgery may take as long as 2 weeks for wounds that would otherwise take 7 to 10 days. If sutures are indicated, delayed healing times must be taken into account when considering suture removal, to prevent premature dehiscence of the wound.24

Nonsutured CO2 laser wounds heal forming a fibrinous coagulum that functions as a biological dressing. Because of the slow epithelialization of CO2 laser wounds, the fibrinous coagulum may be present beyond 2 weeks.23 A clinician new to lasers should not confuse this healing process for infection and unnecessarily perform a wound debridement or prescribe antibiotics when there is no indication. Unlike postsurgical healing after conventional techniques, an increase in pain 4 to 7 days postoperatively may occur, which can normally be controlled with minimal oral analgesics (e.g., ibuprofen). The clinical appearance and anticipated discomfort after laser surgery should be discussed with patients to avoid confusion or perceived complications.24

Virtually all laser wavelengths used for surgery to vaporize, coagulate, or cut tissue may produce particulate debris called laser plume. Clinicians, assistants, and patients may be at risk from exposure to laser plume. Laser plume may contain carcinogens, irritants, dusts, viruses, and bacterial spores, depending on the procedure. It may also contain carbon monoxide, polyaromatic hydrocarbons, various toxic gases, and chemicals such as formaldehyde, hydrogen cyanide, and benzene. There are currently no known potential chronic health effects from long-term exposure to laser plume. The literature on infectious transmission of laser plumes in medicine is equivocal. Several studies of patients positive for human papillomavirus type 2 (HPV-2) deoxyribonucleic acid (DNA), revealed no viable viral particles in the laser plume.2631 Other studies have shown HPV DNA in the plume of laser-vaporized tissue.3235 None of the studies reviewed involved treatment within the oral cavity. A review of the literature reveals no cases of any dental personnel becoming ill as a result of inhaling laser plume. In any case, contaminants generated by lasers can and should be controlled by ventilation, safe work practices, and personal protective equipment.

Laser Techniques and Procedures

Although the diode, Nd.YAG, and to a lesser extent the erbium wavelengths may be used in minor office oral surgical procedures, this chapter primarily describes surgeries performed with the CO2 laser. The CO2 laser, the OMS workhorse, is the most frequently used wavelength for these procedures, with more than 30 years of peer-reviewed literature justifying its use in the oral cavity. No other laser wavelength has been as extensively researched and studied in OMS as the CO2 laser.

The basis of any laser technique starts with knowing the ins and outs of the laser system to maximize its use and prevent complications. Laser systems are equipped with an operator’s manual, detailing the safety features. The operator and assistants should thoroughly review the manual before using the laser and should strictly adhere to the indications. No health care personnel should attempt to use a laser on a patient without proper training (see Chapter 16).

The most frequent injuries resulting from the use of lasers are caused by laser energy emitted beyond the working area and striking the surrounding soft tissues. This typically occurs when a specimen is horizontally transected, because the laser energy may redirect off a reflective metal surface being used as an oral retractor. These complications usually result in minimal or no injury, but a patient’s initial response to the stimulus may be interpreted as pain. This can easily be avoided by obstructing the distant tissues with moist gauze or a tongue blade and by using matte-finished, nonreflective instrumentation.3

Wavelength-specific eyewear is mandatory, protecting the user from misdirected or reflected laser energy. During laser use, high-speed suction or evacuator and high-filtration masks should be worn to prevent illness from inhalation of the plume released at the site of energy-tissue interaction. To prevent ignition with flammable gases, nitrous oxide and oxygen must be temporarily discontinued during laser use to prevent serious harm to the patient. Because CO2 laser energy is well absorbed by hydroxyapatite, a major component of tooth enamel, significant amounts of laser energy absorbed by the teeth can cause etching and pitting, weakening enamel36 and increasing pulpal temperature.37 When in proximity to a CO2 laser, the teeth can be protected with moistened gauze or a fabricated tooth guard to absorb errant energy from the laser (Figure 6-1).

The clinician uses the following three fundamental photothermal techniques with a CO2 laser to perform various intraoral procedures:

All minor office-based oral surgical techniques, from frenectomy to incision for third molar surgery and apicoectomy, are based on these three techniques. The first procedure discussed here is biopsy; however, the techniques used to perform biopsies are applicable to virtually every intraoral procedure.

It is important to understand that one or more techniques may be necessary for any given clinical scenario, depending on three surgeon-controlled laser parameters: energy, time, and spot size.3 These parameters equate at the focal point of the laser energy emitted from any given laser handpiece. Altering the distance of the handpiece from the tissue serves to focus and defocus the laser beam’s focal point, therefore altering the effect of the laser on the target tissue. A laser in focus will excise, incise, ablate, or coagulate with the most efficiency. When the laser is out of focus, there will be less efficiency in ablation/incision/excision and more efficiency in coagulation.

Incision/Excision Techniques and Procedures

Focused mode is when the focal point of laser energy makes contact with tissue, maximizing the power per unit to a pinpointed area. Using the CO2 laser in a focused mode allows for increased depth, yet produces an incision thinner than a scalpel, functioning as a “light” scalpel. The characteristics of the CO2 laser make it ideal for most intraoral procedures traditionally performed with a scalpel, such as incision and excision biopsy, lesion removal, and flap elevation.3,7,38

Biopsy Procedure

Every patient requires a screening for cancer, which is accomplished by performing a thorough oral, head, and neck examination. Oral examinations can be made more efficient by inspecting high-risk sites, where 90% of oral squamous cell cancers arise: floor of the mouth, ventrolateral aspect of the tongue, and the soft palate complex.39 Many screening and detection aids can be used as adjunctive tools to identify precancerous and cancerous tissues early and before they become visible to the naked eye, expediting diagnosis and improving the patient’s prognosis. Oh and Laskin40 noted accentuation of some lesions when patients used acetic rinse, but there was no significant improvement in detection. Also, examination with the chemiluminescent ViziLite system produced reflections that made visualization more difficult.

When cellular changes are detected, the downfall of all adjunctive techniques is that a surgical biopsy procedure remains necessary to obtain a diagnosis.4143 Biopsy is the process of removing a sample of tissue from a patient for diagnostic examination. The procedure is required to determine the underlying process within the tissues that is causing changes in their clinical appearance. The diagnosis obtained ranges from “normalcy” to an inflammatory process, and “systemic disease” to a benign or malignant neoplasm. Ultimately, an accurate diagnosis guides the clinician in determining the necessary treatment. The five intraoral biopsy techniques are aspiration biopsy, cytological biopsy, brush biopsy, excision biopsy, and incision biopsy.

The brush biopsy technique has improved the sensitivity (92.3%) and specificity (94.3%) for detection of oral squamous cell carcinoma or dysplasia when tested on visually identified lesions.4446 Note that brush biopsies in particular should be used only as a screening tool, and atypical cell identification or positive results from such biopsies require an additional step implementing a surgical procedure to confirm a diagnosis.47

Formulating a definitive diagnosis generally requires the acquisition of a tissue specimen histologically representative of the lesion, using one of the two surgical biopsy techniques. Until recently, most surgical biopsies have been performed with “cold steel,” the scalpel. The disadvantage of using a scalpel is that patients frequently experience significant intraoperative and postoperative sequelae.

The preferred modality for the intraoral surgical biopsy is the laser, for several reasons. The laser’s hemostatic nature creates a blood-free surgical field compared to the scalpel. This is critical when treating vascular lesions or patients who tend to bleed excessively; the laser minimizes blood loss. Other advantages of using a laser are reduced surgery time (superior precision of incision) and unparalleled visualization of the surgical site (lack of blood in surgical field). Decreasing the length of surgery reduces tissue manipulation and potential wound contamination. The laser’s thermal effect produces minimal lateral thermal necrosis but provokes enough response to attain a bactericidal effect. Patients are comfortable during the procedure with minimal local anesthesia. After laser surgery, patients quickly return to their daily routine, experiencing no bleeding or swelling. Discomfort is usually minimal and generally can be treated with OTC nonnarcotic analgesics such as ibuprofen. Surgical biopsies with a laser can often be performed on a patient’s initial visit, accelerating the diagnostic process and expediting treatment.

Stay updated, free dental videos. Join our Telegram channel

Jan 5, 2015 | Posted by in General Dentistry | Comments Off on 6: Oral Surgery for the General Practitioner

VIDEdental - Online dental courses

Get VIDEdental app for watching clinical videos